12
ASSEMBLY AND PREPARATION
Tidying up Cables
As illustrated below, arrange the cables so that
they run below the stand hinge and then cover
them with the cable cover from the bottom up.
Stand hinge
Cable cover
You can disassemble the cable cover by fol-
lowing the assembly instructions in reverse
order.
NOTE
Using the Kensington lock
The Kensington security system connector is
located on the bottom of the Monitor.
For more information on installation and usage, re-
fer to the Kensington lock owner's manual or visit
the website:
http://www.kensington.com
.
Connect the Kensington security system cable
between the Monitor set and a table.
The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
NOTE
To Next Page
Loading...
General