Enabling Wi-Fi functionality for the
Polycom VVX450
By default, the Polycom VVX450 is configured to connect via a wired connection. To enable the
Wi-Fi functionality a USB Wi-Fi dongle needs to be connected to the device and the Wi-Fi option
needs to be enabled from within the menu.
Start by inserting the USB Wi-Fi dongle into the USB port on the rear of the device. The Wi-Fi
mode then needs to be enabled.
This can be done by following the below menu sequence:
Entering the Main Menu and navigating down to option 7 “Wi-Fi”
To Next Page
Loading...
