Polycom IP 550 - Page 2

Barracuda Phone System
Polycom IP-550 Quick Reference Guide 2 / 4
Call Hold
To place a call on hold, press the Hold button.
To resume the call, press Hold again.
Call Transfer
Attended Transfer
To transfer a call, press the Transfer key to the left of the keypad.
Dial the destination number, then press Send.
When the destination party answers, announce the caller, and press Transfer again to
complete the transfer.
Blind Transfer
To transfer a call, press the Blind soft key and enter the destination number.
Press the Send soft key to connect the remote party to the destination, and disconnect yourself
from the call.
Ad-Hoc Conference / 3-Way Calling
Place (or receive) a call.
To add another party to the call, press the Conference key to the left of the keypad.
Enter the destination number or extension and press Send.
Once the destination party answers, press Conference again.
All parties join a 3-way call.
Do Not Disturb
Press the Do Not Disturb button to send all calls to voicemail. The phone display indicates
when Do Not Disturb mode is active.
To resume normal operation, press the Do Not Disturb button again. The phone receives calls
normally.
Call Forwarding