Polycom IP335 - Page 2

SCOE I.T. • 524-8324 • helpdesk@scoe.org Page 2 of 4 Revised 11/7/12
Set Your Ring Tone
1. Press the Menu button.
2. Scroll to Settings. Press to select.
If you have multi-line, Press Line 1 or Line 2.
3. Scroll to Basic. Press to select.
4. Scroll to Ring Type. Press to select.
5. Scroll through Ring Types. To play, press Play.
6. When you find the one you want as your default
ring, press Select.
7. Press the Menu button to exit.
To pick up someone else’s phone
Dial *88 plus their 4 digit number.
To Forward Your Phone
If your phone is set to hunt for another line, press
Menu, then Features, then Do Not Disturb.
Your calls will go directly to the next number.
If you don’t have hunting, use the Web User Panel.
Disable Call Forwarding
Press Do Not Disturb again,
or use the Web User Panel.
Put Calls on Hold
Press the Hold button.
Resume Held Call
Press Resume soft key or press Hold again.
Multiple Calls on Hold
You can receive multiple calls on the same phone
number.
While on the 1
st
call, if a 2
nd
call comes in, you will
hear a Call Waiting tone.
Put the 1
st
call on hold to answer the next call.
Resuming a Held Call from List
Press or to
select the call you want,
and
press Resume soft key.