Procedure
1. Navigate to Settings > Basic > Preferences.
2. Select Default Transfer Type and choose a transfer type.
The selected transfer type is used for all calls.
Transfer a Call
You can transfer a call to another contact and choose the transfer type you want to use for the call.
Procedure
1. During a call, do one of the following
• Press Transfer to use the default transfer type.
• Press and hold Transfer to use the non-default transfer type.
For example, if Blind is the default, press and hold Transfer to perform a Consultative
transfer.
• Press Transfer > More and select Blind or Consultative.
Depending on the default transfer type, either the Blind or Consultative option displays. For
example, if the default transfer type is Blind, then you can select Consultative.
2. Dial a number or choose a contact from the Recent Calls or a directory.
If the transfer type is set to Blind, the call is transferred immediately.
3. If the transfer type is set to Consultative, select Transfer after speaking with your contact.
Cancel a Transfer
If a contact does not answer the transfer or you want to remain speaking with the contact on your
line, you can cancel the transfer before it is complete.
Procedure
1. Select Cancel.
The call is not transferred and becomes active.
To Next Page
Loading...
Need help?
General
