APPLIANCE EDITION INSTALLATION POLYCOM REALPRESENCE COLLABORATION SERVER V.8.6
I
NSTALLING THE REALPRESENCE COLLABORATION SERVER (RMX) 2000
30 P
OLYCOM REALPRESENCE COLLABORATION SERVER GETTING STARTED GUIDE
– Mount the RealPresence Collaboration Server on top of the rail
runners.
– Fasten the RealPresence Collaboration Server to the rack spacers
using the flat head screw (item 8) with flat washer (item 9)
through the two holes in the RealPresence Collaboration Server
front mounting brackets.
Figure 1-7: Install the RealPresence Collaboration Server (RMX) 2000 in a rack
Figure 1-8: Install the RealPresence Collaboration Server (RMX) 4000 in a rack
Refer to Detail of front rackspacerassemblyforRealPresenceCollabo-
rationServer(RMX)2000/4000for installation instructions.
• Using a shelf
– Install the shelf, supplied by the rack manufacturer, in the rack.
– Mount the Collaboration Server unit on the shelf.
To Next Page
Loading...
