APPLIANCE EDITION INSTALLATION POLYCOM REALPRESENCE COLLABORATION SERVER V.8.6
I
NSTALLING THE REALPRESENCE COLLABORATION SERVER (RMX) 4000
44 P
OLYCOM REALPRESENCE COLLABORATION SERVER GETTING STARTED GUIDE
Connect Cables to the RTM LAN Card of RealPresence Collaboration Server (RMX)
4000
• To connect the cables to the RTM LAN Card of RealPresence Collabora-
tion Server (RMX) 4000:
• When an RTM LAN-4 port card is installed on the RealPresence Collab-
oration Server (RMX) 4000, connect the LAN cable to LAN 2.
ADDITIONAL INFORMATION: With LAN Redundancy and Multiple Network Services
configurations, connect the LAN cable to LAN 1.
• An MPMRx card on the front of the RMX must always be seated or
connected opposite to either an RTM LAN - 4 ports or RTM ISDN card on
the rear of the chassis.
• The RTM LAN type card is always required with Multiple Networks and
LAN Redundancy configurations.
• When an RTM LAN-2 port card is installed on the Collaboration Server
4000, connect the LAN cable to LAN 2.
ADDITIONAL INFORMATION: With LAN Redundancy and Multiple Network Services
configurations, connect the LAN cable to LAN 1.
• The RTM LAN type card is always required with Multiple Networks and
LAN Redundancy configurations.
For more information, see LAN Redundancy and Multiple Network
Services in the RealPresence Collaboration
Server(RMX)1800/2000/4000Administrator’sGuide.
Connect Cables to the RTM ISDN Card of RealPresence Collaboration Server (RMX)
4000
RTM ISDN cards come in two versions: one-LAN port version, and four-LAN
ports version. The cabling for these two versions are different.
Connect Cables to the One-Port RTM ISDN Card of RealPresence Collabo-
ration Server (RMX) 4000
• To connect cables to the one-port RTM ISDN card of RealPresence
Collaboration Server (RMX) 4000:
To Next Page
Loading...
