– open a web browser to the URL: http://ip_address
– enter the default “456” password and press “Submit” button
IP phone configuration
Let's assume the following:
Your PBX company domain is mycompany.com:5058 (chosen when you created your
PBX account)
Your PBX hostname is myserver.cluana.com:5058 (provided by Cluana)
Your IP Phone User ID / Auth ID is xten (your choice, 31 in the picture below)
Your analog adapter password is : password (your choice)
After login, set the following parameters :
Settings
Lines
Line 1
Identification
Address: xten@mycompany.com
Authentication User ID: xten
Authentication Password: password
Outbound Proxy
Address: myserver.cluana.com
Port: 5058
Server 1
Address: mycompany.com
Port: 5058
Expires: 120
Press “Save” button
To Next Page
Loading...
