Polycom SoundPoint IP 335 Factory Reset

Polycom SoundPoint IP Phones: Reboot and Reset
Factory resetting a phone to its defaults is time-consuming and not generally
recommended as a troubleshooting step, except as a last resort.
You should not factory reset a phone to address call quality issues.
Objective
To factory reset a Polycom SoundPoint IP phone.
Please Note:
• Factory resetting a phone will restore the device to its factory default state, erasing all personalized
settings, speed dials, line keys, and configuration.
• These procedures specifically concern the Polycom SoundPoint and SoundStation IP series of
phones. See here for the VVX series.
Applies To
• Polycom Soundpoint IP Phones
Procedure
To restart or reboot
For each model listed below, press and hold the indicated keys in combination:
• IP 335: 2, 4, 5, 6
https://support.8x8.com/equipment-devices/phones/polycom/polycom-soundpoint-ip-phones-reboot-factory-reset
Updated: Wed, 17 Aug 2022 00:03:44 GMT
Powered by
1

Polycom SoundPoint IP 335 Specifications

Operating Environment

operating temperature	0 to 40°C
operating relative humidity	5% to 95%, non-condensing
storage temperature	-40 to +70°C

Power

power over ethernet	IEEE 802.3af Class2
external AC adapter voltage	24V DC
external AC adapter current	500mA

Weight and Dimensions

phone weight	0.625 kg
unit box dimensions	25 cm x 10.5 cm x 29.5 cm
unit box weight	1.49 kg
size	17 cm x 14.5 cm x 17.5 cm