Telstra VVX 410 Phone Guide | April 2014 Page 6
Telstra VVX410 Phone Guide
Scroll down and select Ring Type
Scroll to select the Ring type option
Press the Play soft key to listen to the tune
Press the Back soft key three times to
return to the Home view screen
24. Backlight display
To change the Backlight display
of the phone screen
From the Home View screen select the
Settings icon
Select Basic
Scroll down and select Backlight Intensity
Select Backlight On Intensity and choose
either High, Medium or Low
Select Backlight Idle Intensity and choose
either High, Medium or Low
Or
Select Maximum Intensity
Select the Up or Down soft key to adjust
the intensity
Press the Back soft key to return to the
previous screen
25. Headsets
You can connect an Analogue headset to
your phone. When the headset button is
pressed it illuminates green. All calls
received will be answered through the
headset. When the headset is activated,
Mute and Volume will take effect on the
headset device.
26. Enabling Headset Memory
Mode
You set up your phone so that all incoming
and outgoing calls use your headset. At any
time you can switch to handset or speaker
mode
From the Home Screen
Select Settings icon
Select Basic
Select Preferences
Scroll down and select Headset...
Select Headset memory...
Scroll down and select Enabled
Press the Home button to return to the
home screen
To access Headset memory mode, press the
headset key twice.
The headset button will flash when enabled
27. Warning icon
If your phone is unable to perform certain
tasks, a warning icon will display in
the status bar. The warning icon lets you
know that your phone has one or more
issues that you should know about. Contact
your Customer Group Administrator to
advise them of this issue.
28. Voice Portal – Message icon
First time login setup
From Line view press the voicemail
icon to access voicemail
Or
From the Home view select the Messages
icon and select Message Centre...
Enter a passcode, when prompted; after
your initial login you will need to change
your passcode.
It is essential your passcode be changed
for security reasons. It is important to keep
your new passcode private.
Record your name when prompted
Press the hash key (#)
Follow the prompts to save the recording,
or re-record your name
29. Login to the Voice Portal
From your own phone:
Press the Messages button, or dial
the Voice Portal extension.
Enter your passcode followed by the hash
key (#).
To Next Page
Loading...
