Telstra VVX 410 Phone Guide | July 2014 Page 1
Telstra VVX410/411 Phone Guide
If you are required to initially configure your
IP phone you will be advised of the
Username and Password. This information
only needs to be entered once via the
QSetup soft key.
Tap the QSetup soft key
Tap the Server User field
Enter the Server User credentials (obtain
this information from Telstra.
This number will be your phone number)
Tap the Server Password field
Tap the Mode soft key and tap 123 (to
select numbers)
Enter the Server password (obtain this
information from Telstra)
Tap Save Config to Save the Config
You will now need to manually reboot the
phone
Press the Home button
Tap Settings
Tap Basic, swipe your finger up the screen
and
Tap Restart Phone
Tap the Yes soft key (to confirm)
Note 1: Restarting the phone may take a few
minutes
Note 2: If your phone has been preconfigured
the QSetup soft key will not be visible
Note 3: This is only required for phones that are
on DMS (Device Management System)
platform.
From the Home screen, navigate to and
Select Settings
Select Status
Select Platform
Select Application
Select Main
The Firmware Version will be listed on the
screen
Use the Page Indicator icon if there are
multiple pages to move through the pages
Alternatively, you can Swipe the screen to
display additional icons
New Call – Navigate to and select New
Call to display Dialler
From the Dialler, you can enter a number or
URL and place a call
From the Dialler, you can access the Directory,
Recent Calls and Favorites
Messages – Navigate to and select
Messages to access your Voicemail Messages
Directories – Directories allow you to
view all the contacts in your Local Contact
Directory
From your Directory, you can add and search
for contacts, as well as quickly access the
Dialler, Recent Calls and Favorites
The changes between the VVX 410 and the
VVX 411 is a simple hardware refresh. There
are no changes to the user functionality. This
Phone Guide is based on Firmware version
4.1.7. Follow the instructions listed below to
check your Phone Firmware version.
To Next Page
Need help?
General
