EasyManua.ls Logo

POOLEX Nano - Installation Layout; Condensation Draining Kit Installation

POOLEX Nano
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
3.3 Connecting the condensation draining kit
While operating, the heat pump is subject to condensation. This will result in a more or less large run-off
of water, depending on the degree of humidity. To channel this ow, we recommend that you install the
condensation drainage kit.
3. Installation
3.2 Installation layout
The lter located upstream of the heat pump must be regularly cleared so that the water in
the system is clean, thus avoiding the operational problems associated with dirt or clog-
ging in the lter.
TOWARDS THE POOL
Filtration + Pump
Automated treatment
system
FROM THE POOL
POOL

Other manuals for POOLEX Nano

Related product manuals