EasyManua.ls Logo

POOLEX Nano - Maintenance and Servicing; Maintenance, Servicing, and Winter Storage

POOLEX Nano
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
6. Maintenance and servicing
6.1 Maintenance, servicing and winter storage
Cleaning
The heat pump’s casing must be cleaned with a damp cloth. The use of detergents or other household
products could damage the surface of the casing and affect its properties.
The evaporator at the rear of the heat pump must be carefully cleaned with a vacuum cleaner and soft
brush attachment.
Annual maintenance
The following operations must be undertaken by a qualied person at least once a year.
Carry out safety checks.
Check the integrity of the electrical wiring.
Check the earthing connections.
Monitor the state of the pressure gauge and the presence of refrigerant.
Winter storage
Your heat pump is designed to operate in rainy weather conditions and withstand frost using a specially
created anti-frost technology. However it is not recommended to leave it outside for long periods of time (eg
over winter). After draining down the pool for the winter, store the heat pump in a dry place.
WARNING: Before undertaking maintenance work on the unit, ensure that you have
disconnected the electrical power supply.
7. Repairs

Other manuals for POOLEX Nano

Related product manuals