Blind stitch
Selection of stitch L or M
Thread tension dial 1~4
Presser Z-presser
For easy-loosing thick fabric, overlock the raw edge, as
shown in the diagram, fold the fabric and leave 0.7 cm
allowance at margin.
Place the fabric on the machine and make the needle just
pass through left of folded portion of the fabric.
After sewing, press the fabric to make blind stitch visible on
its face side.
Part IV Decorative stitch
Decorative stitch
Selection of pattern G, H, I, J
Thread tension dial
6~8
Presser
Z-presser
Use thin fabric and fold it in twill direction.
Align the folded edge with seam of presser and drop the
needle outside the fabric margin.
1
2
3
1 2 3
13
To Next Page
Loading...
