Part II Preparation for Sewing
Connecting power supply
Power plug
Power switch
Power supply
Sewing machine plug
Before connecting power supply, check the voltage
indicated in the machine for consistency with the voltage of
the to-be-connected power supply.
1. Set power switch at “OFF”
2. Insert plug into sewing machine socket
3. Insert power plug into socket
4. Turn on power switch
Reverse sewing
Press reverse stitch lever to start reverse sewing
Presser foot lifter
Presser foot lever
Raise the lifter to the middle of position to insert or
remove fabric.
Lift it to its highest to change the presser foot or to
remove thick fabric.
2
To Next Page
Loading...
