Before Each Start=Up:
Place On/Auto/Off lever to "Off".1.
2.
Pull the regulator knob out and turn counterclockwise to set the outlet
pressure to zero.
3. Attach hose and accessories. NOTE: The hose or accessory will require
a quick connect plug if the air outlet is equipped with a quick connect
socket.
_Risk of Bursting. Too much air pressure causes a
-- hazardous risk of bursting. Check the manufacturer's
maximum pressure rating for air tools and accessories. The regulator
outlet pressure must never exceed the maximum pressure rating.
How to Start:
1. Turn the On/Auto/Off lever to "On/Auto" and allow tank pressure to build.
Motor will stop when tank pressure reaches "cut-out" pressure.
2. Pull the regulator knob out and turn clockwise to increase pressure. When
the desired pressure is reached push knob in to lock in place.
The compressor is ready for use.
A10260 16- ENG
To Next Page
Loading...
