This button turns the printer on or off.
This indicator turns on when the printer is on.
This indicator works when the printer has
something wrong. For more details, refer to the
Status LED Indicators section given below.
This indicator turns on when the paper-out issue
occurs.
Press this button once to feed the paper roll for one
line. Hold down this button to continue feeding the
roll paper
Open this cover when installing or replacing the
paper roll.
Push this lever to open the paper roll cover.
An opening where the paper is outputted
A settled routine that makes the paper spacer plate
hard to escape
Paper Near End Sensor
(Option)
Provided for adjusting the detection position to suit
the diameter of the paper core used, and for
adjusting the detection position of remaining
amount of paper
Printer Power 24V
DC-IN Connector
To Next Page
Loading...
