ESC % n 1B 25 n Select/cancel download character set
n=0, canceled ; n=1, selected
ESC W n s
(x1 y1 x2 y2)
1B 57 n s (x1 y1
x2 y2)
Specify/cancel the window range
n=1,2,3,4 (four windows) ; s=0,1 (disable,
enable)
1 x1 x2 20 (column) ; 1 y1 y2 2 (row)≦≦≦ ≦≦≦
ESC = n 1B 3D n Select peripheral device
n=1, printer ; n=2, display ; n=3, printer &
display
US : 1F 3A Set starting/ending position of macro
definition
US ^ n m 1F 5E n m Execute and quit macro
0 (n,m) 255≦≦
n: specifies the time interval for display of
characters in units of [n* 50msec]
m: specifies the interval of macro execution
every [m*50msec]
US @ 1F 40 Execute self-test
US T h m 1F 54 h m Display time :0 h 23 ; 0 m 59≦≦ ≦ ≦
US U 1F 55 Display of time counter
* International Font Set Table
n (Hex) International Font Set n (Hex) International Font Set
00h
01h
02h
03h
04h
05h
U.S.A.
FRANCE
GERMANY
U.K.
DENMARK I
SWEDEN
06h
07h
08h
09h
0Ah
ITALY
SPAIN
JAPAN
NORWAY
DENMARK II
SLAVONIC/RUSSIA
Specify decimal point, comma, semicolon, annunciator*※
(1) US . n (Decimal Point) / US , n (Comma) / US ; n (Semicolon):
The displayed character codes are form 32(20h) to 127(7Eh), and
128(80h) to 255(FFh) in the character code table.
The
period/comma/semicolon displayed only for n. The period is not displayed for
the subsequent display characters.
(2) US # n m (annunciator):
[ range ] n = 0(00h) or 1(01h) / m = 0(00h)~20(14h)
[ notes ] When n= 0, the annunciator at column m is turned off.
When n= 1, the annunciator at column m is turned on.
”m” specify column number (the most left column is column 1) at
which annunciator to be turned on/off is placed.
When m = 0, all annunciators are turned on or off.
Once an annuciator(s) is turned on, it remains on until turned off by this
command, the ESC@ or US@ command is executed, or the power is turned
off. [example]: To turn on the annunciator at the third column:
[n = 01h ], [ m = 03h ]
To turn off all the annunciators:
[n = 00h ], [ m = 00h ]
Above commands relating decimal point, comma, semicolon, and
※
annunciator may not be available due to hardware limit of display tube.
To Next Page
Loading...