POSX XP8200 - 4.1.2 EPSON Command Mode

4.1.2 EPSON Command Mode
Command Hex Function Description
HT 09 Move cursor right
BS 08 Move cursor left
US LF 1F 0A Move cursor up
LF 0A Move cursor down
US CR 1F 0D Move cursor to right-most position
CR 0D Move cursor to left-most position
HOM 0B Move cursor to home position
US B 1F 42 Move cursor to bottom position
US $ x y 1F 24 x y Move cursor to specified position
1 x(column) 20 ; 1 y(row) 2≦≦≦≦
US C n 1F 43 n Select/cancel cursor display
n=0, canceled ; n=1, selected
CLR 0C Clear display screen
CAN 18 Clear cursor line
US X n 1F 58 n Brightness adjustment
1n4≦≦
US E n 1F 45 n Blink display screen
0 n 255 (n*50msec) ON / (n*50msec) ≦≦
OFF
n= 0, blinking is canceled
n=255, display is turned off
ESC @ 1B 40 Initialize display
ESC t n 1B 74 n Select character code table
0 n 5 ( Please refer ≦≦ “Chapter 5” )
ESC R n 1B 52 n Select international character set
( Please refer International Font Set Table )
US r n 1F 72 n Select/cancel reverse character
n=0, canceled ; n=1, selected
US MD1 1F 01 Specify overwrite mode
US MD2 1F 02 Specify vertical scroll mode
US MD3 1F 03 Specify horizontal scroll mode
US . n 1F 2E n Specify period display
n= display character code
US , n 1F 2C n Specify comma display
n= display character code
US ; n 1F 3B n Specify semicolon (period+comma) display
n= display character code
US # n m 1F 23 n m Specify display annunciator,, turn the
annunciator at “m” column on or off
n=0,1 (Off, On) ; 0 m 20≦≦
ESC & s n m
[a(pl..p5)]
(m-n+1)
1B 26 s n m
[a(pl..p5)](m-n+1)
Define download characters
s=1 ; 32 n m 126 ; a=5≦≦ ≦
( p1..p5 = pattern1..pattern5 )
ESC ? n 1B 3F n Cancel user-defined characters
32 n 126 (n=character code)≦≦