Potec PRK-6000 - Observe Image Obtained by Retroillumination [ILLUM Mode]

PRK-6000 Operation Manual
- 25 -
End of the ILLUM Mode
Press CLEAR button to clear the image
Press VD button to change the vertex
distance
6.2 Observe image obtained by Retroillumination [ILLUM Mode]
By directing a light into the pupil, you can observe the condition of cataract or scratches on
contact lens on the monitor in ILLUM Mode.
Maximum of two images for each eye can be displayed and stored in one display.
You can select an image and display it in a magnified size.
You can upload an image and display it in a magnified size to a computer.
(1) Enter ILLUM mode.
Press ILLUM button in the Measurement MODE. Press END button in order to go out
ILLUM mode.
[Freeze Mode Display]
[Freeze/Ref Mode Display]
Amount of light
Right side eye
Light for retroillumination
reflected from cornea
Vertex distance
Pupil
Mode
change the amount of ligh
t
Light source
Light for eye front illumination
reflected from cornea
Sub Numbe
r
Mode
Pupil
Press DISP button to enter menu display
Change the mode (“Freeze ⇔ Frz/Ref”)
Capture the image
IOL button is invalid