Need help?Do you have a question about the Potec PRK-8000 and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Model | PRK-8000 |
| Manufacturer | Potec |
| Type | Auto Refractor Keratometer |
| Refraction Measurement Range - Cylinder | 0D ~ ±12D |
| PD Measurement | 45mm to 85mm |
| Display | LCD |
| Power Supply | AC100~240V, 50/60Hz |
Specific safety guidance for users in the United States regarding equipment modifications.
Details regarding the EU representative and product compliance with directives like 93/42/EEC.
Provides general safety instructions and meanings of warning and caution signs.
Lists various measurements like refractometry, keratometry, and corneal diameter.
Details the wide dioptric range and accuracy improvements for measurements.
Guidelines on handling, environment, and cleaning to prevent damage or measurement errors.
Instructions for safe operation, power management, and maintenance.
Identifies and describes the primary physical parts of the PRK-8000 main unit.
Explains the chinrest adjustment mechanism and the touch screen interface.
Details buttons for selecting measurement modes like REF, KER, and K/R.
Describes buttons for measurement, display, setup, and printing operations.
Steps for attaching the model eye and releasing the stage lock.
Procedures for adjusting the model eye's height and selecting measurement modes.
Detailed steps for aligning and focusing the model eye for measurement.
Explains manual and automatic measurement procedures using the model eye.
Performing refractometry measurements only.
Performing keratometry measurements only.
Performing continuous keratometry and refractometry.
Covers CLBC, K(P), ILLUM, SIZE, DISPLAY, and SETUP modes.
Steps to select K/R mode and adjust the patient's eye height.
Configuring settings for REF and KER measurements.
Guidance on identifying and resolving issues before contacting support.
Explains error messages that appear during power-on.
Explains error messages that occur during measurement.
Details on how to get the instrument repaired and required information.
Lists detailed specifications for measurement ranges and parameters.
To Next Page
