PRK-8000 Operation Manual
- 23 -
6. Other Modes
6.1 Semi-Auto Eye Tracking
Identifying the pupil position of the examinee, optical head moves automatically to fit the
height of the pupil.
(1) ON/OFF semi-automatic eye tracking
If you press ‘3rd button’ on the left side of the display, semi-automatic eye tracking is
enabled or disabled.
: semi-automatic eye tracking is enabled state
: semi-automatic eye tracking is disabled state
(2) Focusing
In the measurement screen, adjust the focus so that the yellow dot appears in the
center of the pupil. When semi-automatic eye tracking is enabled state, if the pupil
position is detected the optical head height is automatically adjusted.
Pupil detection
NOTE: can be used for semi-automatic operation function Î REF, KER, K/R, CLBC, K(P) MODE
To Next Page
Loading...
