PRK-6000 Operation Manual
- 28 -
6.3 DISPLAY Mode
The stored data (maximum 10 data for each eye) in memory can be displayed in this mode.
To enter DISPLAY Mode, press DISP button in the Measurement Mode. Press END button in
order to go out SIZE Mode.
NOTES:
① Press one of four tab buttons on upper side of display. Result of selected
page will be displayed.
② Press PRINT button to print the stored data.
③ Press CLEAR button to clear all stored data in memory.
< Display for REF > < Display for KER >
< Display for CLBC > < Display for K(P) >
To Next Page
Loading...
