EasyManua.ls Logo

Potensic D85 - Throttle mode switch; How to change throttle mode

Potensic D85
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Left hand throttle and right hand throttle are available for option at the remote controller. User can
choose different control stick mode as per operation habit. There are 2 stick modes that could be found
as below:
Throttle mode switch
Mode 2
Throttle control
Leftward/Rightward
flight control
Forward control
Rotate Clockwise /
Counterclockwise
Mode 1
Throttle control
Leftward/Rightward
flight control
Forward control
Backward control Backward control
Rotate Clockwise /
Counterclockwise
OFF ON
Mode
OFF ON
Mode
!
Attention: To change the stick mode of the remote controller, please make sure that the
remote controller is under signal connection status (the indicator light keep
flashing). If not, the stick mode could not be changed.
Step 1. Keep pressing the red button and turn on the remote controller at the same time , the remote
controller is under signal connection status (indicated as pic.1);
Step 2. Keep pressing the RTH button “ ” for 3 seconds to choose the throttle control mode (indicated
as pic.2). The throttle control mode will change according to each press. The mode number is
shown on the LCD screen. The throttle control mode is set at mode 2 by default.
OFF ON
A B A B
Mode
OFF ON
How to change throttle mode
Pic. 1 Pic. 2
-10-

Table of Contents

Related product manuals