Potensic D85 - Product assemble; How to attach and detach the propellers; High landing gear installation

● Please make sure that the clockwise and the counter-clockwise propellers are installed on
the correct motors, because the aircraft will not fly normally for wrong propellers installation.
● Be careful when installing the propellers, as they are a little sharp.
● Please use MJX propellers for this aircraft.
● Extra propellers can be ordered additionally.
Install propeller A and propeller B on the corresponding motor shaft and fix the rotor propellers tightly by
rotating them as per the “lock” direction showed on the propellers (indicated as Pic. 1).
●Detach the propellers:
● Attach the propellers:
Fix the brushless motor by rotor propellers changing tool and then rotate and remove the propellers as
per the “unlock” direction showed on the propellers (indicated as Pic. 2).
How to attach and detach the propellers
Product assemble
B
B
B
B
A
A
A
A
B
B
B
B
A
A
A
A
High landing gear installation
Insert the high landing gear plug into the socket locating at the bottom of the aircraft, align the 2 screws
positions and fix the high landing gear by screwing clockwise.
!
Pic. 1 Pic. 2
-3-