Battery installation
How to remove the battery
Slide the battery into the battery compartment at the rear of the aircraft by pushing with appropriate
force, the aircraft will make beep sounds with LED lights flashing. Please make sure that the battery
is installed firmly before flying.
Step 1. Put your thumb and middle finger on the designated position (indicated as Pic.1);
Step 2. Press the elastic buckle at the rear of the battery with your index finger, and pull backward with
appropriate force, then the battery will be removed (indicated as Pic. 2-3).
To avoid slipping, please keep your finger and your aircraft dry and clean.
How to charge the battery of aircraft
Step 1. Make sure that the power adaptor is connected with the power outlet (indicated as Pic. 1);
Step 2. Connect the balance charger to the power adaptor (indicated as Pic. 2);
Step 3. Insert the white plug of the charging converter face up into the socket of the balance charger
(indicated as Pic. 3);
Step 4. Slide the charging converter onto the battery from the middle position and insert the pins into
the battery plug to start charging (indicated as Pic. 4).
Full charging time takes about 7 hours.
How to charge the battery with charging device A:
!
Attention: The battery should be installed firmly, failure to do so may affect the flight safety
of your aircraft. The aircraft may crash due to power-cut during the flight.
Pic.2
Pic.3
Pic.1
-4-
To Next Page
Loading...
