2.2 Personnel requirements
2.2.1 Qualifications
WARNING!
Danger of injury in case of insufficient qualifica-
tion!
Improper operation can lead to severe personal inju-
ries and/or material damage.
– Only those persons who have been specified in the
corresponding chapters of this installation manual
should be entrusted with the listed types of work.
– Employ certified experts, if in doubt.
The following qualifications are specified for different areas of
activity listed in the installation manual.
Instructed person
was instructed by the operating company about the duties
assigned to her/him and the possible dangers that may arise from
inappropriate conduct.
Qualified personnel
are able to carry out assigned work and to recognize possible dan-
gers due to professional training, knowledge, and experience as
well as profound knowledge of applicable regulations.
Skilled electrician
A skilled electrician is able to carry out assigned work and to
recognize and avoid possible dangers due to professional training,
knowledge, and experience as well as profound knowledge of
applicable regulations.
The skilled electrician has been trained specially for his working
environment and he has profound knowledge of relevant standards
and regulations.
2.2.2 Unauthorized persons
WARNING!
Danger for unauthorized persons!
Unauthorized persons, who do not meet the require-
ments described in this installation manual, are not
aware of the dangers in the working area.
– Keep unauthorized persons away from the working
area.
– If in doubt, address such persons and ask them to
leave the working area.
– Interrupt your work as long as unauthorized per-
sons are in the working area.
PA 8000 EL CNC control unit
Safety
24.09.2015 | 12
To Next Page
Loading...
Need help?
General
