4.3 Operating conditions
Property Value Unit
Operating temperature +5 - +45 °C
+41 - +113 °F
Storage temperature -20 - +60 °C
-4 - +140 °F
Temperature gradient (within 10
minutes)
10 °C
50 °F
Relative humidity (non-condensing) 80 %
Maximum acceleration (non-operating) 4.0 G
Maximum acceleration (operating) 3.5 G
Protection class (EN 60529) IP20
NOTICE!
Functional defects!
The module casing does not provide sufficient protec-
tion against environmental influences. Dust and mois-
ture may cause malfunctions.
– Only operate the control unit inside a cabinet that
complies with the requirements as listed in the
technical data (see
Ä
Table on page 74).
General
PA 8000 EL CNC control unit
Technical data
24.09.2015 | 66
To Next Page
Loading...
Need help?
General
