14 | CHARGE Installation & Owner’s Guide
OPERATION OVERVIEW (continued)
Emergency Start with Lithium Batteries
When engine batteries go to sleep, they must be re-
activated in order to use Emergency Start. Follow your
battery manufacturer’s instructions for proper re-activation
or “wake-up” procedures. Once battery has been
re-activated, Emergency Start can be enabled.
NOTE: Emergency Start WILL NOT work if trolling motor
batteries are asleep.
Re-Activating Lithium Trolling Motor Batteries
If your trolling motor batteries go to sleep, running your engine will re-activate them and
begin to charge them via alternator charging.
If this does not work, consult your battery manufacturer for re-activation instructions and
then run engine to charge them via alternator charging.
Using Lithium Batteries in Extreme Cold Temperatures
It is recommended that lithium batteries be covered up with a blanket in cold
temperatures. The sheath where the wires split contains a temperature sensor that will need to be covered as
well. FIG. 3
Your Android/iOS device can be a powerful tool when used in conjuction with
the CHARGE. Receive important notifications, power readouts, and access
special features of the CHARGE via our C-Monster app. C-Monster app
features for the CHARGE include:
• Real-Time Look at Power flow & Battery Levels: See &
manage your power to make better decisions on the water.
• Emergency Start: If you run the engine battery dry, you can
access the emergency start feature in the app. This pulls power
from the trolling motor batteries for one final jolt.
• Update Software: You will recieve automatic prompts to update
your C-Monster software if a new version is available.
• Quick Product Registration: You can easily register your
CHARGE™ system directly through the app.
• Theft Recovery: Once you register your CHARGE™ with the
C-Monster App, if its ever stolen we can help law enforcement
track and recover it.
DOWNLOAD
THE C-MONSTER APP @
C-MONSTER 2.0 APP
Operating
Sleeping
(Emergency Start
Not Available)
Figure 2
Figure 3
(Wiring Sheath)
To Next Page
Loading...