Power-Pole Charge - Installation

CHARGE Installation & Owner’s Guidel | 7
Congratulations on your purchase of our Power-Pole CHARGE™ featuring C-Monster
Control System. It has been designed, engineered, and manufactured to provide the
best possible performance and dependability. Please read all installation instructions carefully.
The information contained here describes the proper procedures for safely installing your
Power-Pole CHARGE™. If you have questions, contact our Customer Service Team
at 1+ (813) 689-9932 option 2 or visit our website at www.power-pole.com.
INSTALLATION HARDWARE (INCLUDED)
A. (1) Charge Unit
B. (4) 1” #8 Mounting Screws
C. (1) 40 Amp Fuse and Fuse Holder
(8 AWG Wire)
D. (1) 25 Amp Fuse and Fuse Holder
(12 AWG Wire)
E. (2) 3 Amp Fuses and Fuse Holders
(Yellow and Blue 18 AWG Wires)
INSTALLATION TOOLS:
• Electric Drill
• 7/64” Drill Bit
• Phillips-Head Driver Bit
• Fine-Tip Marke
r
A
C
D
E
B