EasyManua.ls Logo

Power Systems PS2030PM - Optional Accessories; 8 Transport of the Compressor; Packaging

Default Icon
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Istruzioni per l’uso e manutenzione
Cod. OQ7.5ARG114 – GB
Emiss. 19-01-11 Rev. 0 - Agg. /
19
POWER SYSTEM SRL
Via dell’Emigrante, 11/13 - 36040 Brendola (VI) Itali
a
7.4 OPTIONAL ACCESSORIES
THE ACCESSORIES MUST BE REQUESTED EXCLUSIVELY FROM THE MANUFACTURER,
COMMUNICATING THE SERIAL NUMBER AND THE YEAR OF MANUFACTURE OF THE
COMPRESSOR.
The accessories avalaible upon request for the PS2000PM models are the following:
- integrated dryer
- oil tank heating resistance
- heat recovery kit with oil/water heat exchanger
- triple stage air filter for dusty ambients
- tropicalized version
Please contact Power System for further
8 TRANSPORT OF THE COMPRESSOR
The compressor is delivered to the buyer by a carrier appointed by the customer, by the manufacturer or by the
authorised dealer, according to the contractual agreements at the time of sale.
8.1 PACKAGING
The compressor may be supplied alone, with a dryer, with a reservoir, or complete with dryer and reservoir.
The packaging may therefore be of different sizes. The cardboard packaging that covers the compressor and any accessories is marked
on the outside with one or more adhesive labels with the respective information.
ENSURE THAT THE PACKAGING HAS NOT BEEN DAMAGED DURING TRANSPORT.
MAKE A NOTE OF ANY DAMAGE FOUND ON THE DELIVERY NOTE AND SIGN IT STATING
“ACCEPTED WITH RESERVE”.

Table of Contents