Istruzioni per l’uso e manutenzione
Cod. OQ7.5ARG114 – GB
Emiss. 19-01-11 Rev. 0 - Agg. /
33
POWER SYSTEM SRL
Via dell’Emigrante, 11/13 - 36040 Brendola (VI) Itali
RIF. DENOMINATION FUNCTION
7
Main electric switch
“O - OFF” - “I - ON”
• Pos. “O - OFF”: Switches off power to the command and control
panel.
Pos. “I - ON”: Switches on power to the command and control panel.
8
Yellow button with danger signal,
clock “h” - “RESET”
Resets alarms
At the 1
st
click it shows information on the hours worked
At the 2
nd
click it shows the auxiliary temperature
9
Green “Start” button “I”, “-”
symbol
Allows the “Rotary test”
Allows starting of the compressor
If during programming decreases the values.
10
Led green Machine started
11
LCD alphanumeric display with 2
lines of 16 characters
Displays the video pages for setting the work parameters, the machine
status and the alarms (see par. 17.5).
12
Red “STOP” button, “+” symbol
Allows stopping of the compressor
If during programming increases the values
13
Led green Machine stopped
To Next Page
Loading...