EasyManua.ls Logo

Powermat PM0748 - Protective Clothing; Transporting the Sprayer; Safety Rules before Starting and During Work

Powermat PM0748
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ABOUTPROTECTION TIME
1. The operator of a battery-operated knapsack sprayer should always be equipped with personal
protective equipment during work. Clothes must protect all parts of the operator's body against
contact with the sprayed liquid and objects rejected by it during spraying. This also applies to
work on preparing the spray liquid and cleaning the field sprayer. The recommended personal
protective equipment is:
Safety glasses to protect the eyes,
Mask or half-mask to protect against inhalation of chemicals,
Jacket and trousers or coverall made of a material resistant to chemicals, with
wristbands. Pants should overlap shoes,
Hand protection gloves,
Shoes with non-slip soles.
2. Protective clothing should be well suited to the person wearing it and put on so that
chemicals cannot get into the skin. Depending on the type of activity, the eyes and head
should be protected with a hood or protective glasses.
3. Avoid wearing loose coats, scarves, jewelery and other items of clothing that can be caught on
branches or bushes during work. You should also take care of the safety of long hair by
wearing a cap, a hard hat or similar headgear.
4. During work, the face and eyes should be protected with a face shield or protective glasses. When
working in densely shrubbed terrain, a protective helmet should be worn.
5. If your clothes are contaminated with chemicals, change your clothes immediately.
T.SPRAYER RANSPORT
1. Always switch off the pump when transporting the equipment.
2. In order to protect the device against damage during transport, use the original box in which
the sprayer was delivered to you.
3. Drain the fuel mixture and the working liquid from the device - carefully check the liquid tank,
fuel tank, pump, lines, lance for fluid residues and tightness.
WITHSAFETY RULES BEFORE BEGINNING AND DURING WORK
1. Before starting the device, check the technical condition of the entire device.
2. Make sure the pump switch is working properly.
3. Check the liquid tank, pump, lines, fuel tank - for leaks.
4. It is not allowed to commence work with discovered damages and irregularities in the operation
of the device. In this case, please contact an authorized service center to have the device
checked.
5. The device may only be operated by one operator. Bystanders should not be closer than within 5
meters from the device.
6. Before starting the pump, the valve in the control handle must not be set to continuous operation, it must be
set to the closed position. The nozzle outlet should be oriented towards the free space.
7. Never work with the device in closed rooms. In confined spaces, such as pits, pits or trenches,
make sure that adequate air exchange is ensured during operation. Keep a safe distance
from assistants, if necessary. Take care to take regular breaks between sprayings.
10

Related product manuals