PowerMate
Operation Manua
PowerMate
ACCESSORIES/SPARE PARTS FOR M-SERIES MODELS
404300 BIG WHEEL ATTACHMENT
400217 IN-VEHICLE CHARGER
400218 BATTERY CHARGER REMOTE KIT
051310 SEALED BATTERY 12V-30Ah
404210 STEP EXTENSION
304200 PIVOT PAD/MAT ASSEMBLY
L P INTERNATIONAL INC.
P.O. Box 696, 151 Savannah Oaks Dr.,
Brantford, ON N3T 5P9
TEL: (519)759-3292 FAX: (519) 759-3298
1-800-697-6283
www.powermate.info
BIG WHEEL mounts onto the frame of an M-1 or M-2B in
seconds. Designed to make traversing uneven, broken
terrain much easier.
The MobileCharge 12E charges your PowerMate from the
vehicle 12V system. When the vehicle if off, it will continu
to charge for 2.5 hrs, protecting the vehicle battery. The 3-
stage charging profile extends battery life and is
independent of vehicle system voltage.
In-Vehicle Charger
comes with accessory
port plug. Battery
Charger Remote Kit not
shown.
Our hard-wired MobileCharge 12E smart
charging system keeps yout PowerMate
charged as it remains in the back of your
vehicle. It will never draw draw the
vehicle battery down below 70% capacity
so your vehicle will always will have
enough power to start the engine.
Gel pack, memory free battery.
Charge only with PowerMate
charger for best performance.
Comes with Mat Assembly and can be
placed at the top or bottom of a
staircase to create more room and a
better turning surface for maneuvering
your PowerMate with it's load. Allows
you to complete 17% more moves.
Solidstate charger with automatic shut-off.
Safe to leave plugged into the PowerMate at
all times. Will not overcharge the battery.
vailable in two sizes, the Pivot Pad is
made of durable material which allows
you to turn the PowerMate, with it's
load, on a dime. Move your loads
effortlessly around tight corners while
protecting your customer's property.
400790 SIDE HANDLES
410211 BATTERY CHARGER
Step Extension = 20"x 28" Mat Assembly = 22"x 44"
Pivot Pad = 24" wide x 30"l ong x 1/4" thick
Mat Assembly = 28" wide x 44" long x 1/4" thick
PN 010930 Rev.G
Eng. 04/ 18/ 18
8.02