SAFETY PRECAUTIONS
READ THE MANUAL (Mandatory)
PowerMate
Operation Manua
Read all safety and operating instructions before anyone operates your
PowerMate
®
Unit. Use the PowerMate
®
unit only as described in this manual.
Retain all safety and operating instructions for future reference. Ensure they are
readily available.
Heed all warnings in the safety and operating instructions.
Follow all installation, operation, service, and safety instructions.
Operator must have received approved training on the PowerMate
®
unit to be
used. Training shall include theory, practice, and testing.
Never allow unqualified or un-authorized personnel to operate the equipment.
Operator must be familiar with normal operating practices and procedures.
Whenever there is and doubt as to safety, the operator should stop the operation
and not proceed until safe conditions are restored.
Operator is responsible for maintaining proficiency on PowerMate
®
equipment.
Familiarity with instructions, safety procedures, maintenance practices, controls,
operation, loading, are required at all times.
WARNING: Only trained personnel shall operate PowerMate
®
equipment. Failure
to comply may result in possible severe injury to the operator and/or others, and
damage and/or loss of property.
Wear safety shoes. Keep hair, loose clothing, fingers and all parts of the body
away from pinch points and moving/rotating parts. Use equipment handles and
controls for manoeuvring and operation.
Operator must have good hearing and vision (with or without correction) and
must have good depth perception.
Operator must not be afflicted with any health condition(s) that might cause loss
of control or ability.
Do not operate the equipment when using alcohol or taking medication that will
affect your physical performance or judgement.
Do not eat or drink during the operation of PowerMate
®
equipment.
Stay alert when operating PowerMate
®
equipment.
No horseplay or practical jokes when operating the equipment.
Do not lift people and never ride on the PowerMate
®
Unit.
Do not abuse the equipment. Use PowerMate
®
equipment only for their
intended use.
2.04
PN 010110 Rev.E
Eng. 05 / 08/ 14
To Next Page
Loading...
Need help?
General
