To Next Page
J
Justin PetersNov 16, 2025
How to fix Powermatic 2415 blade cutting inaccurately?
- BBrian SpenceNov 16, 2025
If your Powermatic Saw blade is cutting inaccurately, resulting in cuts that are not straight, consider these potential causes and solutions: * **Worn or Damaged Blade:** Replace the blade if the teeth are worn or the blade is damaged. * **Fence Alignment:** Ensure the fence is parallel to the blade. If not, align it properly. * **Blade Guide Adjustment:** Incorrectly adjusted blade guides can cause inaccurate cuts. Adjust the blade guides properly. * **Incorrect Blade Speed:** Change to the correct speed. * **Excessive Feed Force:** Reduce the force with which you are feeding the workpiece. * **Upper Blade Guide Position:** Make sure the upper blade guides are close enough to the workpiece, ideally about 3/16” above it. * **Incorrect Blade Choice:** Use correct blade for th...
General
