Need help?Do you have a question about the Powermatic 64A and is the answer not in the manual?
General| Brand | Powermatic |
|---|---|
| Model | 64A |
| Category | Saw |
| Language | English |
Details WMH Tool Group's warranty policy and authorized repair stations.
Covers the 1-year limited warranty, exclusions, and limitations of liability.
Essential safety rules for operating the table saw, including personal protection and work area.
Ensuring proper electrical grounding and safe use of the machine.
Guidelines for material condition, large stock, and safe operation.
Information on health risks from dust and proper extension cord usage.
Explains the meaning of CAUTION and WARNING labels.
Familiarizes users with the safety decals and their locations.
Highlights the main components and capabilities of the saw.
Lists detailed specifications like blade size, motor, and weight.
Instructions for inspecting the saw and listing its included parts.
Lists required tools and provides helpful hints for assembly.
Lists the parts needed for stand assembly.
Step-by-step guide for constructing the saw's stand.
Procedure for mounting the saw body onto the assembled stand.
Steps for attaching the elevating and tilting handwheels and knobs.
Detailed steps for installing the motor, pulley, and base plate.
Procedure for attaching the splitter mounting bracket to the trunnion.
Steps for mounting the saw blade and aligning the splitter.
How to install the table insert and attach extension wings.
Instructions for installing fence, dust shroud, and power switch.
Instructions for mitre gauge assembly, dado insert, and grounding.
Ensuring correct grounding connections and safe adapter usage.
Steps for adjusting blade height, tilt, and resetting the tilt pointer.
How to set positive stops and adjust the mitre gauge.
Procedures for aligning the mitre gauge, splitter, and blade to the T-slot.
Recommendations for maintenance and an introduction to saw operation.
Detailed list of factors that cause kickbacks and how to avoid them.
Understanding ripping, safety steps, and techniques for performing cuts.
Methods for resawing boards and performing safe crosscuts.
How to perform bevel, mitre, and dado cuts accurately.
Safety measures for dadoing and instructions for 230V conversion.
Details on making and using feather boards, filler pieces, and push sticks.
Guide to diagnosing and solving common problems with the saw.
Detailed list of part numbers for the main saw, extension wings, and guard.
List of part numbers for the switch assembly and related hardware.
Visual representation of the table saw components and their assembly.
List of part numbers for the saw's stand assembly.
List of part numbers for the motor and trunnion assembly.
List of part numbers for motor, cords, and electrical accessories.
Visual guide to the motor and trunnion assembly components.
Part number and description for the optional caster set.
List of optional accessories with their corresponding part numbers.
Phone, fax, email, and website for ordering parts and service.
Company address, phone, fax, email, and website.
To Next Page
