Powermatic 64A - Product Features and Specifications; Key Features of Model 64 A; Technical Specifications

7
FEATURES (Model 64A)
SPECIFICATIONS
Table size with extensions .................................................................................................... 40" x 27"
Blade size .............................................................................................................. 5/8" arbor, 10" dia.
Fence size .......................................................................................... 2" high x 3-1/2" wide x 36" long
Motor ...................................................................................1-1/2 HP, 1 Ph, 115/230V (prewired 115V)
Blade speed ........................................................................................................................ 4500 RPM
Max. depth of cut at 90 degrees ................................................................................................ 3-1/4"
Max. depth of cut at 45 degrees ............................................................................................... 2-1/8"
Blade tilt ...................................................................................................................... left, 45 degrees
Dust collection hookup ....................................................................................................... 4" diameter
Maximum width of dado cut........................................................................................................ 13/16"
Mitre gauge adjustment..................................................................................... 60 degrees left or right
Switch.......................................................................................................Push button with safety key
Weight .................................................................................................................................... 310 lbs.
NOTE: The above specifications were current at the time this manual was published, but because of our policy
of continuous improvement, Powermatic reserves the right to change specifications without notice and without
incurring obligations.