Why is my Powermatic PM1500 Saw blade forming cracks at the base of the teeth?
If the blade forms cracks at the base of the teeth, it could be that the teeth are not suitable for the operation or are incorrectly set, so replace with the proper blade. It may also be that the blade thickness is not suitable for the band wheel diameter, so replace it with a proper thickness blade.
Why doesn't my Powermatic PM1500 reach full speed?
If your band saw does not attain full speed, the extension cord may be too light or too long; replace it with an adequate size and length cord. Another possible cause is low current, so contact a qualified electrician.
General| Type | Cabinet Saw |
|---|---|
| Voltage | 230V |
| Rip Capacity (Left) | 12 inches |
| Dust Port Size | 4 inches |
| Arbor Size | 5/8 inches |
| Maximum Depth of Cut at 90 Degrees | 3-1/8 inches |
| Motor | TEFC induction motor |
Details warranty duration, who is covered, and what is covered.
Essential safety measures for operating the band saw.
Safety rules for feeding, adjusting, and machine use.
Details motor type, power, voltage, and electrical requirements.
Instructions for removing and checking the machine.
Safety and procedures for power connection.
Instructions for installing and positioning the fence and its plate.
Ensuring the table is parallel to the saw blade for precise cuts.
Aligning the fence with the miter slot and blade for accurate cutting.
Step-by-step guide for safely removing and installing new saw blades.
How to properly tension the saw blade for optimal performance and safety.
Method for aligning the blade to run centered on the wheels.
Steps for replacing a worn belt and ensuring proper tension.
Explanation of the power indicator, start, stop, and reset buttons.
To Next Page
