To Next PageTo Next Page
Need help?Do you have a question about the powersoft Duecanali Series and is the answer not in the manual?
General| Bridge Mode | Yes |
|---|---|
| Input Impedance | 20k Ohms |
| Damping Factor | >500 |
| Protection | Thermal, Short Circuit, DC, Overload |
| Networking | Optional |
Explains common symbols used in the manual for safety and compliance.
Lists crucial safety precautions for operating the amplifier and avoiding hazards.
Outlines warranty terms and directs users to authorized service centers for repairs.
Details European regulations, WEEE directive, and disposal guidelines.
Covers FCC, Canadian regulations, and ICES-003 notice.
States product conformity with EC directives and applied harmonized standards.
Lists package contents and provides guidance on location, cooling, and cleaning.
Covers AC mains supply, power on/off, energy-saving, and remote control features.
Explains gain selection, input connections, and remote level adjustments.
Details Dante/AES67, Ethernet connectivity, and network topology.
Explains IP addressing, DHCP, Zeroconf, and ArmoníaPlus configuration.
Covers input source selection, backup policies, and output load monitoring.
Illustrates rack installation recommendations and airflow for cooling.
Provides physical dimensions and shows how to access the control panel.
Describes input signal routing for Duecanali/Quattrocanali and remote level adjustment.
Explains the function of system configuration and Remote On/Off dip switches.
Details alarm connections and the RJ45 ports for Ethernet and Dante.
Details the function of buttons, LEDs, and potentiometers on the front panel.
Identifies rear panel connectors for output, power, serial port, and configuration switches.
Explains the LED bars for signal metering and overall system status indicators.
Describes the LEDs indicating operating modes and individual channel status.
