powersoft M50Q - Lantronix Device Initialization; Initialization Procedure Overview; Configure Product Manager Settings

INDEX
23
M SERIES | SERVICE MANUAL
12. VOID VQ Lantronix Device Initialization
Using this procedure you will be able to do:
1. Lantronix setup
2. Device initialiation
3. Firmware update
4. Conguration setting
5. Default preset installtion
HOW TO PROCEED
1. Connect the amplier to your PC via ethernet
2. Install and open “Product Manager”software
3. Select the item highlighted in the picture below and press next:
4. The following window will be shown. Click on “Previous”