Need help?Do you have a question about the powersoft Quattrocanali Series and is the answer not in the manual?
General| Number of Channels | 4 |
|---|---|
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Input Impedance | 20 kΩ balanced |
| Protection | DC, thermal, short circuit, overload |
| Remote Control | Optional |
Overview of buttons, LEDs, and potentiometers on the amplifier's front interface.
Details of all input, output, power, and communication connectors on the rear panel.
Explanation of graphical symbols used in the manual for safety warnings and product compliance.
Essential guidelines for safe installation, operation, and maintenance of the amplifier.
Guidance on selecting an appropriate and well-ventilated installation location for the amplifier.
Explanation of the amplifier's cooling system and instructions for cleaning.
Important safety warnings and precautions to follow during amplifier installation.
Details on signal grounding and analog/digital audio input connections.
Guidance on Ethernet connections and connecting output loads to the amplifier.
How to set gain and operate with low impedance loads.
Understanding system diagnostics, general purpose outputs, and alarm triggers.
Explanation of LED bars for signal metering and status indicators on the LED strip.
Description of LEDs indicating the amplifier's operating mode (power on, standby).
Procedure to test the amplifier's status and identify potential failures.
Configuration of network settings, including DHCP and static IP addressing.
Overview of signal processing, routing, and DSP architecture in the software.
Recommended configuration workflow and monitoring live impedance using the software.
Details on product warranty coverage, duration, and exclusions.
Information on obtaining technical support and repair services from Powersoft.
To Next Page
