PowerTech MB3906 User Manual

Use for the intended purpose
The MB3906 is a battery charger with a pulse trickle charge mode and is
suitable for charging and maintenance charging of the following 6 V or 12 V
lead rechargeable batteries with Wet, Gel, AGM and 12.8V 4-cells LiFePO4:
• 6 V: with a capacity of 12 - 120 Ah
• 12 V: with a capacity of 1.2 - 12 Ah
• 12 V: with a capacity of 12 - 120 Ah
• Lithium (12.8V 4-cells LiFePO4): with a capacity of 8 - 50 Ah
You can also use it to regenerate completely discharged batteries. The battery
charger has protective circuits to prevent sparking and overheating. Any
incorrect or improper use leads to loss of the warranty. The manufacturer
takes no responsibility for damage(s) arising out of usage that is contrary to
the instructions laid down. The appliance is not meant for commercial use.
INTRODUCTION:
Please read these instructions for use carefully and completely, and take
note of all instructions and specifications.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
1

PowerTech MB3906 Specifications

General

Brand	PowerTech
Model	MB3906
Category	Battery Charger
Language	English