PowerWalker 1000 - Page 12

10
Load information
Indicates the load level by 0-24%, 25-49%, 50-74% and
75-100%, or overload alarm.
Mode operation information
UPS operates on the Line mode.
UPS operates on the AVR mode.
UPS operates on the Battery mode.
Setting of LED bars.
Indicates PC’s CPU temperature (C)
Setting the temperature alarm level.
Indicates PC’s CPU speed(Mhz)
Indicates PC’s CPU Load
Indicates wireless connection matched.
Indicates the remote panel is connected to docking base.
Battery information
Indicates the UPS battery level by 0-24%, 25-49%,
50-74%, and 75-100%.
Once the battery is in low level, “LOW BATT” icon will
display.
Indicates the NiMH battery level of remote panel.
*Except UPS fault condition, LCD backlight automatically shuts off if no action for 1 minutes (30
seconds when panel is removed from base).
Audible Alarm
Overload
Sounding every 0.5 seconds
Low battery
Sounding every second
Overcharge
Sounding every 1.5 seconds
Battery replacement
Sounding every 2 seconds
Battery mode
Sounding every 10 seconds
Fault
Continuously sounding