To Next PageTo Next Page
Need help?Do you have a question about the PowerWalker VFI 1000 and is the answer not in the manual?
General| Operating Temperature | 0 - 40°C |
|---|---|
| Storage Temperature | -15 - 45°C |
| Audible Alarm(s) | Yes |
| Product Colour | Black |
| Width | 145 mm |
| Output Frequency | 50/60 Hz |
| Alarm Modes | Low battery, overload, fault |
| Safety | CE |
| Communication Interface | USB |
| Typical Backup Time at Half Load | 10-15 minutes |
| Typical Backup Time at Full Load | 3-5 minutes |
Explains the purpose and benefits of the Uninterruptible Power System (UPS) for critical load operations.
Lists the main technical characteristics and advantages of the UPS system.
Provides essential precautions and guidelines for correct and safe UPS operation.
Guidelines and precautions for safely moving the UPS unit.
Recommended placement and environmental considerations for the UPS.
Instructions for safely installing and connecting the UPS.
Procedures and warnings related to operating the UPS.
Safety measures for performing maintenance on the UPS.
Description of the UPS's Liquid Crystal Display and its functions.
Explanation of the Light Emitting Diode indicators on the UPS.
Details on the physical dimensions and front/side views of the UPS.
Description of the ports and connectors on the rear panel of the UPS.
Steps for inspecting the UPS system and its packaging before connecting.
Instructions for connecting the UPS power input and load output.
Essential checks to perform before turning on the UPS.
Step-by-step guide on how to start and operate the UPS.
Guidelines for storing the UPS for extended periods.
Details on navigating and using the various menus on the LCD display.
How to configure the voltage range for bypass auto-transfer.
Procedure for setting the desired output voltage for the UPS.
Diagnosing UPS issues based on LED/LCD status and appropriate actions.
Illustrates the internal functional blocks and power flow within the UPS.
Describes how the UPS functions when AC utility power is stable.
Explains the UPS operation when AC power is interrupted.
Lists the circumstances under which the UPS will enable bypass mode.
Details on connecting the UPS to a computer via its communication port.
Information about the DB9 serial port and its pin assignments.
