PPA Jet Flex - Table of Contents

2 3
IMPORTANT SAFETY INSTRUCTIONS
Recommendation:
The specialized PPA installer must follow all
the instructions mentioned in this TECHNI-
CAL MANUAL and the USER’S MANUAL to
install the operator.
With the USER’S MANUAL in hand, the in-
staller must show the operator’s informa-
tion, applications, and safety items to the
user.
Before installing the operator, closely read
and follow all the instructions contained in
this manual.
-Before installing the operator, ensure the
local electric power supply is compatible
with the one required on its identication
label.
- Do not turn on the electric power sup-
ply until installation or maintenance are
completed. Always make the control board
electrical connections with the power sup-
ply turned o.
- Once installation is complete, ensure the
garage door parts do not extend into the
path and public sidewalk.
- Using total shutdown devices when in-
stalling an operator is mandatory.
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ........................................................................................ 3
TECHNICAL FEATURES .................................................................................................................. 4
TOOLS REQUIRED FOR INSTALLATION .................................................................................... 5
ELECTRICAL INSTALLATION ......................................................................................................... 5
PRECAUTIONS WITH THE ELECTRICAL INSTALLATION ....................................................... 6
PRECAUTIONS WITH THE GATE BEFORE AUTOMATION ..................................................... 7
OPERATOR INSTALLATION AND FASTENING .......................................................................... 8
ANALOG LIMIT SWTICH INSTALLATION ................................................................................ 13
RELUBRICATION..............................................................................................................................16
MAINTENANCE ...............................................................................................................................17