To Next PageTo Next Page
Need help?Do you have a question about the PPA Agility Hibrida and is the answer not in the manual?
Advisory to read the user's manual before operating the equipment.
Overview of the control board's primary functionalities and specifications.
Explanation of the status indicated by various LEDs on the control board.
Guide to configuring control commands for gate operations.
Details on programmable functions with 9 and 2 adjustment levels.
Procedure to clear all registered remote controls from memory.
Step-by-step guide for registering new remote controls.
Setting permission for commands during the opening maneuver.
Adjusting the electronic clutch for gate operation strength.
Configuring the time delay for automatic gate closing.
Setting the distance for deceleration at the start of opening.
Setting the distance for deceleration at the start of closing.
Adjusting gate speed within the deceleration ramp area.
Configuring the brake activation when the motor stops.
Setting the duration for the courtesy light activation.
Procedure to restore default factory settings and erase gate path.
Reversing motor rotation direction and limit switch logic.
Using the programming tool for precise control board settings.
Monitoring sensor status on the main screen for analog systems.
Monitoring sensor status for digital and encoder systems.
Setting the gate opening distance for pedestrian access.
Configuring a pushbutton for pedestrian access.
Configuring photocell output as NO or NC contact.
Setting the photocell analog output using an edge sensor.
Configuring the encoder pulse as an impact reference for protection.
Information on manufacturer, product type, and conformity with EU directives.
General| Brand | PPA |
|---|---|
| Model | Agility Hibrida |
| Category | Control Unit |
| Language | English |
