PR electronics 2261 - Hardware Programming; JP1;JP2 Jumpers for Output Range

6 2261V102-UK
Voltage output through internal shunt:
Signal range ............................................................... 0...10 VDC
Min. signal range (span) ........................................ 250 mVDC
Max. offset ................................................................. 50% of selected max. value
Load (min.) .................................................................. 500 kΩ
Voltage limit .............................................................. < 11.5 VDC
Observed authority requirements:
EMC ................................................................................ 2014/30/EU
RoHS ............................................................................. 2011/65/EU
EAC ................................................................................. TR-CU 020/2011
Of span = Of the presently selected range
Hardware programming
Order
JP1 JP2 Output range MENU 4.3
OFF OFF 0...10 mA
0...20 mA
001
002
ON OFF 0...500 mV
0...1000 mV
003
004
OFF ON 0...5 V
0...10 V
005
006
Type
2261