Need help?Do you have a question about the PR electronics 2261 and is the answer not in the manual?
General| Supply voltage, nom. | 24 VDC |
|---|---|
| Loop current supervision | Yes |
| Output signal | 4-20 mA |
| Accuracy | ±0.1% of span |
| Loop error indication | Yes |
| SIL compatibility | SIL 2 |
| Protection Class | IP20 |
| Input signal | 0-20 mA, 4-20 mA |
| EMC immunity | EN 61326 |
| Input | Configurable for mV, TC, RTD, Ohm, or potentiometer |
| Output | 4-20 mA |
| Weight | 150 g |
The 2261 is microprocessor-controlled and basic-calibrated, allowing input/output programming without readjustment for accuracy and flexibility.
Details on analog input programming for voltage range, span, offset, and overrange, as well as digital input selection.
Information on programming the analog output for current (0-20mA) or voltage (0-10V) signals.
Specifies the mV input measurement range (-40...100 mV), minimum span, max offset, and input resistance.
Details the current output signal range (0-20mA), min/max offset, load, stability, and current limit.
Shows jumper settings (JP1, JP2) and corresponding output ranges (mA/mV/V) and menu codes.
Explains the menu structure (levels 0, 1) and key operations as outlined in the routing diagram.
To Next Page
