Need help?Do you have a question about the PR electronics 4116 and is the answer not in the manual?
General| Brand | PR electronics |
|---|---|
| Model | 4116 |
| Category | Transmitter |
| Language | English |
Covers essential safety guidelines for installation and operation.
Explains the meaning of the red LED and AO.ER display for error modes.
Describes the programming front's functionality as a configuration interface.
Provides accuracy values for different input types under general and basic conditions.
Details TC sensor types, ranges, cold junction compensation, and error detection.
Specifies signal range, load stability, and error detection for current output.
Mentions hardware assessment for use in SIL applications.
Explains how sensor errors and out-of-range signals are displayed on the 45xx.
Specifies the threshold values for detecting sensor breaks or shorts.
Shows wiring diagrams for various input signal types.
Illustrates the terminal connections for current, voltage, and relay outputs.
Explains how to navigate parameters and use help texts for configuration.
Describes how to secure configuration against unauthorized changes.
Explains how error information is shown on the 45xx display.
Lists the 6 configurable settings for relay functions like Setpoint, Window, etc.
Explains how the latch function holds relays in an alarm state until deactivated.
Explains the device's self-diagnosis capabilities and error codes.
Discusses safety readback for SIL mode and Cold Junction Compensation.
Illustrates setting parameters like Setpoint, Hysteresis, and Action Direction.
Details configuration options for the second relay, including latch and error actions.
Explains settings for Relay 1 such as latch, delay, and error actions.
Illustrates how input signals interact with setpoints and delays in latch mode.
Shows input signal behavior within a window for latch function activation and release.
To Next Page
